1:9 TTL Clock Driver

    ON Semiconductor
    The MC10H645 is a single supply, low skew, TTL I/O 1:9 Clock Driver. Devices in the H600 clock driver family utilizes the PLCC-28 for optimal power and signal pin placement. more
    Parts: MC10H645FNG, MC10H645FN, MC10H645FNR2G, MC10H645FNR2more

    3.3V/5V 8-Bit CMOS/ECL/TTL Data Input Parallel/Serial Converter

    ON Semiconductor
    The MC10/100EP446 is an integrated 8-bit parallel to serial data converter. The device is designed with unique circuit topology to operate for NRZ data rates up to 3.2 Gb/s. The conversion sequence from parallel data into a serial data stream is from bit D0 to D7. The parallel input pins D0-D7 are configurable to be threshold controlled by CMOS, ECL, or TTL level signals. The serial data rate output can be selected at internal clock data rate or twice the internal clock data rate using the CKSEL pin. more
    Parts: MC100EP446MNR4G, MC10EP446MNR4G, MC10EP446FAG, MC10EP446MNG, MC100EP446FAR2, MC100EP446FA, MC10EP446FAR2G, MC10EP446FA, MC100EP446MNG, MC100EP446FAR2G, MC10EP446FAR2, MC100EP446FAGmore

    Dual DPDT Analog Switch,TTL Level

    ON Semiconductor
    The NLAST9431 is an advanced CMOS dual-independent DPDT (double pole-double throw) analog switch, fabricated with silicon gate CMOS technology. It achieves high-speed propagation delays and low ON resistances while maintaining CMOS low-power dissipation. This DPDT controls analog and digital voltages that may vary across the full power-supply range (from VCC to GND). more
    Parts: NLAST9431MTR2Gmore

    6N137 - 8-Pin DIP 10 Mbit/s Single-Channel High Speed Logic Gate Output Optocoupler

    Fairchild Semiconductor Corporation
    Good loop elimination\LSTTL to TTL, LSTTL or 5-volt CMOS\Line receiver, data transmission\Data multiplexing\Switching power supplies\Pulse transformer replacement\Computer-peripheral interface more
    Parts: 6N137SD_NL, 6N137SD, 6N137_NL, 6N137W, 6N137WV, 6N137S, 6N137S_NL, 6N137SV, 6N137SDV, 6N137, 6N137Vmore

    HCPL0638 - 10MBit/s Logic Dual Channel High Performance Optocoupler

    Fairchild Semiconductor Corporation
    Ground loop elimination\LSTTL to TTL, LSTTL or 5-volt CMOS\Line receiver, data transmission\Data multiplexing\Switching power supplies\Pulse transformer replacement\Computer-peripheral interface more
    Parts: HCPL0638, HCPL0638R1, HCPL0638R2more

    HCPL0639 - 10MBit/s Logic Dual Channel High Performance Optocoupler

    Fairchild Semiconductor Corporation
    Ground loop elimination\LSTTL to TTL, LSTTL or 5-volt CMOS\Line receiver, data transmission\Data multiplexing\Switching power supplies\Pulse transformer replacement\Computer-peripheral interface more
    Parts: HCPL0639R2, HCPL0639, HCPL0639R1more

    HCPL0637 - 10MBit/s Logic Dual Channel High Performance Optocoupler

    Fairchild Semiconductor Corporation
    Ground loop elimination\LSTTL to TTL, LSTTL or 5-volt CMOS\Line receiver, data transmission\Data multiplexing\Switching power supplies\Pulse transformer replacement\Computer-peripheral interface more
    Parts: HCPL0637R1, HCPL0637R2, HCPL0637more

    6N137M Fairchild Semiconductor Data Sheet

    Fairchild Semiconductor Corporation
    Ground loop elimination \LSTTL to TTL, LSTTL or 5-volt CMOS \Line receiver, data transmission \Data multiplexing \Switching power supplies \Pulse transformer replacement \Computer-peripheral interface more
    Parts: 6N137Mmore

    FSAL200 - Wide Bandwidth Quad 2:1 Analog Multiplexer/Demultiplexer Switch

    Fairchild Semiconductor Corporation
    Typical 6ohm switch connection between two ports\Minimal propagation delay through the switch\Low ICC\Zero bounce in flow-through mode\Control inputs compatible with TTL level\Rail-to-rail signal handling\Low insertion loss\Route communications signals including:\10/100 Ethernet\USB1.1\100VG-AnyLAN\Token Ring 4/16 Mbps\ATM25\SONET OCI 51.8 Mbps\T1/E1 more
    Parts: FSAL200MTCX, FSAL200QSCX, FSAL200QSC, FSAL200MTC, FSAL200QSC_NL, FSAL200QSCX_NLmore

    NLAST44599-D: Low Voltage Single Supply Dual DPDT Analog Switch

    ON Semiconductor
    The NLAST44599 is an advanced CMOS dual-independent DPDT (double pole-double throw) analog switch, fabricated with silicon gate CMOS technology. It achieves high-speed propagation delays and low ON resistances while maintaining CMOS low-power dissipation. This DPDT controls analog and digital voltages that may vary across the full power-supply range (from VCC to GND). more
    Parts: NLAST44599MNG, NLAST44599MNR2, NLAST44599DTG, NLAST44599MNR2G, NLAST44599DTR2G, NLAST44599MN, NLAST44599DT, NLAST44599DTR2more

    74LVC157A - Quad 2-input multiplexer

    NXP Semiconductors
    The 74LVC157A is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. more
    Parts: 74LVC157APW,112, 74LVC157ADB,112, 74LVC157ABQ,115, 74LVC157APW,118, 74LVC157ADB-T, 74LVC157AD-T, 74LVC157AD,112, 74LVC157ADB,118, 74LVC157ABQ-G, 74LVC157AD,118, 74LVC157APW-Tmore

    74LVC257A - Quad 2-input multiplexer with 5 V tolerant inputs/outputs; 3-state

    NXP Semiconductors
    The 74LVC257A is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. more
    Parts: 74LVC257APW-T, 74LVC257ADB,112, 74LVC257ABQ,115, 74LVC257APW,118, 74LVC257ADB,118, 74LVC257ABQ-G, 74LVC257AD,118, 74LVC257ADB-T, 74LVC257APW,112, 74LVC257AD-T, 74LVC257AD,112more

    Analog Multiplexers/Demultiplexers with Injection Current Effect Control with LSTTL Compatible Inputs

    ON Semiconductor
    White Goods, Desktop, Industrial, etc; more
    Parts: M74HCT4851ADWR2G, MC74HCT4851ADG, MC74HCT4851ADR2G, MC74HCT4851ADTG, NLVHCT4851ADTR2G, NLV74HCT4851ADRG, M74HCT4851ADTR2Gmore

    MAX3690EVKIT: Evaluation Kit for the MAX3690

    Maxim Integrated Products
    The MAX3690 evaluation kit (EV kit) is an assembled surface-mount demonstration board that provides easy evaluation of the MAX3690 622Mbps serializer with TTL input, clock synthesis, and differential PECL output. more
    Parts: MAX3690EVKITmore

    74HC/HCT151 - 8-input multiplexer

    NXP Semiconductors
    The 74HC/HCT151 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. more
    Parts: 74HCT151PW,112, 74HC151D,653, 74HCT151PW,118, 74HC151PW,118, 74HC151DB,118, 74HCT151N,652, 74HCT151PW-T, 74HCT151N, 74HCT151DB,118, 74HC151N,652, 74HC151DB,112, 74HC151PW,112, 74HC151N, 74HCT151D,652, 74HCT151D,653, 74HC151PW-T, 74HCT151D-T, 74HC151D,652, 74HCT151DB-T, 74HCT151DB,112, 74HC151D-T, 74HC151DB-Tmore

    74HC_HCT154 - 4-to-16 line decoder/demultiplexer

    NXP Semiconductors
    The 74HC154; 74HCT154 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The 74HC154; 74HCT154 decoders accept four active HIGH binary address inputs and provide 16 mutually-exclusive active LOW outputs. The two-input enable gate can be used to strobe the decoder to eliminate the normal decoding 'glitches' on the outputs, or can be used for the expansion of the decoder. The enable gate has two ANDed inputs which must be LOW to enable the outputs. The 74HC154; 74HCT154 can be used as a 1-to-16 demultiplexer by using one of the enable inputs as the multiplexed data input. When the other enable input is LOW, the addressed output will follow the state of the applied data. more
    Parts: 74HC154BQ,118, 74HC154N,652, 74HCT154D,653, 74HCT154BQ,118, 74HC154PW-T, 74HC154DB,118, 74HCT154D,652, 74HC154D,653, 74HCT154DB-T, 74HCT154DB,118, 74HCT154N, 74HC154PW,112, 74HC154D,652, 74HC154D-T, 74HCT154N,652, 74HCT154DB,112, 74HC154PW,118, 74HC154BQ, 74HC154DB-T, 74HC154N, 74HC154DB,112, 74HCT154PW-T, 74HCT154D-T, 74HCT154PW,112, 74HCT154BQ, 74HCT154PW,118more

    74LVC646A - Octal bus transceiver/register; 3-state

    NXP Semiconductors
    The 74LVC646A is a high-performance, low-power, low-voltage, Si-gate CMOS device and superior to most advanced CMOS compatible TTL families. Inputs can be driven from either 3.3 V or 5 V devices. In 3-state operation, outputs can handle 5 V. This feature allows the use of these devices as translators in a mixed 3.3 V and 5 V environment. The 74LVC646A consists of non-inverting bus transceiver circuits with 3-state outputs, D-type flip-flops and control circuitry arranged for multiplexed transmission of data directly from the internal registers. Data on the A or B bus will be clocked in the internal registers, as the appropriate clock (CPAB or CPBA) goes to a HIGH logic level. Output enable (OE) and direction (DIR) inputs are provided to control the transceiver function. In the transceiver mode, data present at high-impedance port may be stored in either the A or B register, or in both. With the select source inputs (SAB and SBA) stored and real-time (transparent mode) data can be multiplexed. The direction (DIR) input determines which bus will receive data when OE is active (LOW). In the isolation mode (OE = HIGH), A data may be stored in the B register and/or B data may be stored in the A register. When an output function is disabled, the input function is still enabled and may be used to store and transmit data. Only one of the two buses A or B may be driven at a time. more
    Parts: 74LVC646ADB-T, 74LVC646AD,112, 74LVC646ADB,112, 74LVC646ADB,118, 74LVC646APW-T, 74LVC646AD,118, 74LVC646APW,118, 74LVC646AD-T, 74LVC646APW,112more

    74AUP1G98 - Low-power configurable multiple function gate

    NXP Semiconductors
    The 74AUP1G98 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial Power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP1G98 provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the logic functions MUX, AND, OR, NAND, NOR, inverter and buffer. All inputs can be connected to VCC or GND. The 74AUP1G98 has Schmitt trigger inputs making it capable of transforming slowly changing input signals into sharply defined, jitter-free output signals The inputs switch at different points for positive and negative-going signals. The difference between the positive voltage VT+ and the negative voltage VT- is defined as the input hysteresis voltage VH. more
    Parts: 74AUP1G98GF,132, 74AUP1G98GF, 74AUP1G98GM-H, 74AUP1G98GW-G, 74AUP1G98GM,115, 74AUP1G98GW,125, 74AUP1G98GM,132more

    74AUP2G157 - Low-power 2-input multiplexer

    NXP Semiconductors
    The 74AUP2G157 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP2G157 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y, Y) presents the selected data in the true (non-inverted) and complement form. The enable input (E) is active LOW. When E is HIGH, the output Y is forced LOW and the output Y is forced HIGH regardless of all other input conditions. more
    Parts: 74AUP2G157GM,125, 74AUP2G157GT,115, 74AUP2G157DC, 74AUP2G157GM, 74AUP2G157GT, 74AUP2G157DC,125more

    74AUP1G157 - Low-power 2-input multiplexer

    NXP Semiconductors
    The 74AUP1G157 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP1G157 is a single 2-input multiplexer which selects data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the true (non-inverted) form. more
    Parts: 74AUP1G157GM-H, 74AUP1G157GW,125, 74AUP1G157GM,115, 74AUP1G157GF,132, 74AUP1G157GF, 74AUP1G157GW-G, 74AUP1G157GM,132more

    74AUP1G158 - Low-power 2-input multiplexer; inverting

    NXP Semiconductors
    The 74AUP1G158 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. The 74AUP1G158 is a single 2-input multiplexer which select data from two data inputs (I0 and I1) under control of a common data select input (S). The state of the common data select input determines the particular register from which the data comes. The output (Y) presents the selected data in the complement (inverted) form. more
    Parts: 74AUP1G158GF,132, 74AUP1G158GW-G, 74AUP1G158GW,125, 74AUP1G158GM-H, 74AUP1G158GM,115, 74AUP1G158GF, 74AUP1G158GM,132more

    MAX3680EVKIT: Evaluation Kit for the MAX3680

    Maxim Integrated Products
    The MAX3680 evaluation kit (EV kit) simplifies evaluation of the MAX3680 622Mbps, SDH/SONET 1:8 deserializer. The EV kit requires only a +3.3V supply, and includes all the external components necessary to interface with 3.3V PECL/TTL logic. The board can be connected directly to the output of a clock-and-data-recovery circuit (such as the MAX3675) and to the TTL input of an overhead termination circuit. It can also be used with a signal generator and an oscilloscope to evaluate the MAX3680’s basic functionality. more
    Parts: MAX3680EVKITmore

    CBTS3253 - Dual 1-of-4 FET multiplexer/demultiplexer with Schottky diode clamping

    NXP Semiconductors
    The CBTS3253 is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. more
    Parts: CBTS3253D-T, CBTS3253DS-T, CBTS3253DB-T, CBTS3253PW-Tmore

    Low Cost, Miniature Fiber Optic Components with ST®, SMA, SC and FC Ports

    Avago Technologies
    The HFBR-0400 Series of components is designed to provide cost effective, high performance fiber optic communication links for information systems and industrial applications with link distances of up to 2.7 kilometers. With the HFBR-24X6, the 125 MHz analog receiver, data rates of up to 160 megabaud are attainable. more
    Parts: HFBR-0400, HFBR-RLS010, HFBR-2416M, HFBR-0416, HFBR-1415T, HFBR-1424, HFBR-2422, HFBR-0410, HFBR-2412TC, HFBR-1414M, HFBR-2416T, HFBR-24E6, HFBR-1414T, HFBR-RNS001, HFBR-14E4, HFBR-1412TM, HFBR-1404, HFBR-RTD45D, HFBR-1415more

    CBT3253A - Dual 1-of-4 FET multiplexer/demultiplexer

    NXP Semiconductors
    The CBT3253A is a dual 1-of-4 high-speed TTL-compatible FET multiplexer/demultiplexer. The low on-resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. 1OE, 2OE, S0, and S1 select the appropriate B output for the A-input data. The CBT3253A is characterized for operation from -40 °C to +85 °C. more
    Parts: CBT3253APW,112, CBT3253AD,112, CBT3253APW-T, CBT3253ADB,118, CBT3253AD-T, CBT3253AD,118, CBT3253APW,118, CBT3253ADB-T, CBT3253ADS,112, CBT3253ADB,112, CBT3253ADS,118, CBT3253ADS-Tmore

    Quad 2:1 Multiplexer/Demultiplexer Bus Switch

    ON Semiconductor
    The ON Semiconductor 74FST3257 is a quad 2:1, high performance multiplexer/demultiplexer bus switch. The device is CMOS TTL compatible when operating between 4 and 5.5 Volts. The device exhibits extremely low RON and adds nearly zero propagation delay. The device adds no noise or ground bounce to the system. more
    Parts: 74FST3257QS, 74FST3257DR2, 74FST3257DR2G, 74FST3257MNTWG, 74FST3257DTR2G, 74FST3257DTR2, 74FST3257D, 74FST3257QSR, 74FST3257DTmore

    CBT16292 - 12-bit 1-of-2 multiplexer/demultiplexer

    NXP Semiconductors
    The CBT16292 is a 12-bit 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows connections to be made with minimal propagation delay. When the select input (S) is LOW, port nA is connected to port nB1 and port nB2 is connected to GND via an internal pull-down resistor (500O). When select input (S) is HIGH, port nA is connected to port nB2 and nB1 is connected to GND via an internal pull-down resistor (500 O). more
    Parts: CBT16292DGG,112, CBT16292DGG,118, CBT16292DG-Tmore

    74HC_HCT4051 - 8-channel analog multiplexer/demultiplexer

    NXP Semiconductors
    The 74HC4051; 74HCT4051 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). The device is specified in compliance with JEDEC standard no. 7A. The 74HC4051; 74HCT4051 is an 8-channel analog multiplexer/demultiplexer with three digital select inputs (S0 to S2), an active-LOW enable input (E), eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). With E LOW, one of the eight switches is selected (low impedance ON-state) by S0 to S2. With E HIGH, all switches are in the high-impedance OFF-state, independent of S0 to S2. VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E). The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4051 and 4.5 V to 5.5 V for 74HCT4051. The analog inputs/outputs (Y0 to Y7, and Z) can swing between VCC as a positive limit and VEE as a negative limit. VCC - VEE may not exceed 10.0 V. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically ground). more
    Parts: 74HCT4051PW,118, 74HC4051PW-T, 74HC4051BQ, 74HCT4051BQ,115, 74HC4051DB-T, 74HC4051N/S212,112, 74HCT4051D,118, 74HCT4051D/S242,11, 74HCT4051PW,112, 74HCT4051D/S206,11, 74HCT4051D/S212,11, 74HCT4051D/C4J, 74HCT4051N,112, 74HC4051DB,118, 74HCT4051D,112, 74HC4051PW/G,118, 74HC4051D-T, 74HC4051PW,118, 74HC4051D,653, 74HC4051D,652, 74HCT4051PW-T, 74HCT4051DB-T, 74HCT4051D/C,118, 74HCT4051N, 74HC4051DB,112, 74HCT4051BQ, 74HC4051PW,112, 74HCT4051D/N,118, 74HCT4051D-T, 74HCT4051DB,118, 74HC4051N,652, 74HC4051BQ,115, 74HC4051N, 74HC4051PW/S440,11, 74HCT4051DB,112more

    74HC258 - Quad 2-input multiplexer; 3-state; inverting

    NXP Semiconductors
    The 74HC258 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The 74HC258 is specified in compliance with JEDEC standard no. 7A. The 74HC258 has four identical 2-input multiplexers with 3-state outputs, which select 4 bits of data from two sources and is controlled by a common data select input (S). The data inputs from source 0 (1I0 to 4I0) are selected when input S is LOW and the data inputs from source 1 (1I1 to 4I1) are selected when S is HIGH. Data appears at the outputs (1Y to 4Y) in inverted form from the select inputs. The 74HC258 is the logic implementation of a 4-pole, 2-position switch, where the position of the switch is determined by the logic levels applied to S. The outputs are forced to a high-impedance OFF-state when OE is HIGH. The logic equations for the outputs are: 1Y = OE x(1I1 x S + 1I0 x S), 2Y = OE x(2I1 x S + 2I0 x S), 3Y = OE x(3I1 x S + 3I0 x S), 4Y = OE x(4I1 x S + 4I0 x S). The 74HC258 is identical to the 74HC257 but has inverting outputs. more
    Parts: 74HC258DB,112, 74HC258N,652, 74HC258D,653, 74HC258N, 74HC258D,652, 74HC258DB,118, 74HC258D-T, 74HC258DB-Tmore

    74HC158 - Quad 2-input multiplexer; inverting

    NXP Semiconductors
    The 74HC is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The 74HC158 is specified in compliance with JEDEC standard no. 7A. The 74HC158 is a quad 2-input multiplexer which select 4 bits of data from two sources and are controlled by a common data select input (S). The four outputs present the selected data in the inverted form. The enable input (E) is active LOW. When E is HIGH, all the outputs (1Y to 4Y) are forced HIGH regardless of all other input conditions. Moving the data from two groups of registers to four common output buses is a common use of the 74HC158. The state of S determines the particular register from which the data comes. It can also be used as a function generator. The device is useful for implementing highly irregular logic by generating any four of the 16 different functions of two variables with one variable common. The 74HC158 is the logic implementation of a 4-pole, 2-position switch, where the position of the switch is determined by the logic levels applied to S. The logic equations for the output are: 1Y = E.(1l1.S + 1l0.S), 2Y = E.(2l1.S + 2l0.S), 3Y = E.(3l1.S + 3l0.S), 4Y = E.(4l1.S + 4l0.S), The 74HC158 is identical to the 74HC157 but has inverting outputs. more
    Parts: 74HC158D,652, 74HC158D,653, 74HC158N, 74HC158D-T, 74HC158N,652more

    CBT3251 - 1-of-8 FET multiplexer/demultiplexer

    NXP Semiconductors
    The CBT3251 is a 1-of-8 high-speed TTL-compatible FET multiplexer/demultiplexer. The low ON-resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When output enable (OE) is LOW, the CBT3251 is enabled. S0, S1, and S2 select one of the B outputs for the A-input data. The CBT3251 is characterized for operation from -40 °C to +85 °C. more
    Parts: CBT3251D-T, CBT3251DS-T, CBT3251PW,112, CBT3251DS,112, CBT3251DS,118, CBT3251D,118, CBT3251DB, CBT3251DB,118, CBT3251PW-T, CBT3251DB,112, CBT3251PW,118, CBT3251D,112more

    74AHC_AHCT259 - 8-bit addressable latch

    NXP Semiconductors
    The 74AHC259; 74AHCT259 is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7-A. The 74AHC259; 74AHCT259 is a high-speed 8-bit addressable latch designed for general purpose storage applications in digital systems. It is a multifunctional device capable of storing single-line data in eight addressable latches and providing a 3-to-8 decoder and multiplexer function with active HIGH outputs (Q0 to Q7). It also incorporates an active LOW common reset (MR) for resetting all latches as well as an active LOW enable input (LE). The 74AHC259; 74AHCT259 has four modes of operation: In the addressable latch mode, data on the data line (D) is written into the addressed latch. The addressed latch will follow the data input with all non-addressed latches remaining in their previous states, In the memory mode, all latches remain in their previous states and are unaffected by the data or address inputs, In the 3-to-8 decoding or demultiplexing mode, the addressed output follows the state of the data input (D) with all other outputs in the LOW state, In the reset mode, all outputs are LOW and unaffected by the address inputs (A0 to A2) and data input (D). When operating the 74AHC259; 74AHCT259 as an address latch, changing more than one bit of the address could impose a transient-wrong address. Therefore, this should only be done while in the memory mode. more
    Parts: 74AHCT259D,118, 74AHC259PW,118, 74AHC259PW,112, 74AHCT259D,112, 74AHC259PW-T, 74AHC259D-T, 74AHCT259PW-T, 74AHCT259PW,112, 74AHC259D,112, 74AHCT259PW,118, 74AHCT259D-T, 74AHC259D,118more

    CBTS3257 - Quad 1-of-2 multiplexer/demultiplexer with Schottky diode

    NXP Semiconductors
    The CBTS3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. more
    Parts: CBTS3257PWDH-T, CBTS3257DS-T, CBTS3257D-T, CBTS3257DB-Tmore

    CBT3257A - Quad 1-of-2 multiplexer/demultiplexer

    NXP Semiconductors
    The CBT3257A is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output enable (OE) and select-control (S) inputs select the appropriate nB1 and nB2 outputs for the nA input data. The CBT3257A is characterized for operation from -40 °C to +85 °C. more
    Parts: CBT3257ABQ, CBT3257AD-T, CBT3257APW,112, CBT3257AD,118, CBT3257ADS,118, CBT3257ABQ,115, CBT3257ADB,112, CBT3257ADB,118, CBT3257ADB-T, CBT3257APW,118, CBT3257ADS,112, CBT3257AD,112, CBT3257ADS-T, CBT3257APW-Tmore

    MAX4534, MAX4535: Fault-Protected, High-Voltage, Single 4-to-1/Dual 2-to-1 Multiplexers

    Maxim Integrated Products
    The MAX4534 (single 4-to-1) and MAX4535 (dual 2-to- 1) fault-protected multiplexers operate with ±4.5V to ±20V dual supplies or a +9V to +36V single supply. These multiplexers feature fault-protected inputs, railto- rail signal-handling capability, and overvoltage clamping at 150mV beyond the rails. Both parts feature ±40V overvoltage protection with supplies off and ±25V protection with supplies on. On-resistance is 400Ω max and is matched between channels to 10Ω max. All digital inputs have TTL logic thresholds, ensuring TTL/CMOS-logic compatibility when using a single +12V or dual ±15V supplies. more
    Parts: MAX4534EUD+T, MAX4534EPD, MAX4534CSD, MAX4534ESD+, MAX4535EUD+T, MAX4535EPD, MAX4535EUD-T, MAX4535CUD, MAX4535EUD+, MAX4534ESD, MAX4535CPD+, MAX4535ESD+T, MAX4535ESD-T, MAX4534CPD, MAX4535CSD, MAX4534CSD-T, MAX4534CUD+T, MAX4534CSD+T, MAX4535ESD, MAX4535EUD, MAX4535CUD-T, MAX4535EPD+, MAX4535CSD-T, MAX4534EUD, MAX4535CUD+T, MAX4534CUD-T, MAX4534EUD+, MAX4534ESD+T, MAX4534CUD, MAX4534ESD-T, MAX4535CUD+, MAX4534EUD-T, MAX4534CUD+, MAX4535CPD, MAX4534CSD+, MAX4535ESD+more

    SW06: Quad SPST JFET Analog Switch Data Sheet

    Analog Devices
    The SW06 is a four channel single-pole, single-throw analog switch that employs both bipolar and ion-implanted FET devices. The SW06 FET switches use bipolar digital logic inputs which are more resistant to static electricity than CMOS devices. Ruggedness and reliability are inherent in the SW06 design and construction technology. Increased reliability is complemented by excellent electrical specifications. Potential error sources are reduced by minimizing "ON" resistance and controlling leakage currents at high temperatures. The switching FET exhibits minimal RON variation over a 20 V analog signal range and with power supply voltage changes. Operation from a single positive power supply voltage is possible. With V+ = 36 V, V- = 0 V, the analog signal range will extend from ground to +32 V. PNP logic inputs are TTL and CMOS compatible to allow the SW06 to upgrade existing designs. The logic "0" and logic "1" input currents are at microampere levels reducing loading on CMOS and TTL logic. more
    Parts: SW06FQ, 5962-8966901EA, SW06GP, SW06GSZ, SW06FP, SW06GSZ-REEL, SW06GS-REEL, 5962-89669012A, SW06GQ, SW06BQ/883C, SW06BQ, SW06GPZ, SW06NBC, SW06GBC, SW06GSmore

    AD7501/AD7502/AD7503: CMOS 4/8 Channel Analog Multiplexers Data Sheet

    Analog Devices
    The AD7501 and AD7503 are monolithic CMOS, 8-channel analog multiplexers which switch one of eight inputs to a common output, depending on the state of three binary address lines and an "enable" input. The AD7503 is identical to the AD7501 except its "enable" logic is inverted. All digital inputs are TTL/DTL and CMOS logic compatible. more
    Parts: AD7503KNZ, AD7503SD, AD7501KN, AD7501SQ, AD7501JNZ, AD7503SQ/883B, AD7503KN, AD7503JNZ, AD7501KNZ, AD7501JN, AD7503KP, AD7501KQ, AD7501SQ/883B, AD7503JP, AD7503JQ, AD7503SE/883B, AD7503SE, AD7503SD883B, AD7501SE, AD7503KQ, AD7503SQ, AD7501JQ, AD7503JNmore

    ADG428/ADG429: LC2MOS Latchable 4-/8-Channel High Performance Analog Multiplexers Data Sheet

    Analog Devices
    <p>The ADG428 is a monolithic CMOS analog multiplexer comprising eight single channels. On-chip address and control latches facilitate microprocessor interfacing. The ADG428 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. All the control inputs, address and enable inputs are TTL compatible over the fully specified operating temperature range. This makes the part suitable for bus-controlled systems such as data acquisition systems, process controls, avionics and ATEs because the TTL compatible address latches simplify the digital interface design and reduce the board space required. more
    Parts: ADG428BPZ-REEL, ADG428BCHIPS, ADG429BP, ADG429BCHIPS, ADG428BRZ, ADG429BP-REEL, ADG429TCHIPS, ADG429BN, ADG428BR-REEL, ADG428BPZ, ADG428TQ, ADG428BRZ-REEL, ADG428BP, ADG429TQ/883B, ADG428BNZ, ADG428BR, ADG429TQmore

    FST3257 - Quad 2:1 Multiplexer/Demultiplexer Bus Switch

    Fairchild Semiconductor Corporation
    The Fairchild Switch FST3257 is a quad 2:1 high-speed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. more
    Parts: FST3257MX, FST3257M_NL, FST3257QSCX, FST3257MTCX, FST3257MX_NL, FST3257QSC, FST3257M, FST3257QSCX_NL, FST3257MTC, FST3257MTCX_NLmore

    MC74LCX157-D: Low-Voltage CMOS Quad 2-Input Multiplexer

    ON Semiconductor
    The MC74LCX157 is a high performance, quad 2-input multiplexer operating from a 2.3 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows MC74LCX157 inputs to be safely driven from 5 V devices. more
    Parts: MC74LCX157D, MC74LCX157DR2G, MC74LCX157MEL, MC74LCX157DTR2G, MC74LCX157SD, MC74LCX157MR2, MC74LCX157DTG, MC74LCX157DT, MC74LCX157M, MC74LCX157DR2, MC74LCX157SDR2, MC74LCX157DTR2more

    NX5DV330 - Quad 1-of-2 video multiplexer/demultiplexer

    NXP Semiconductors
    The NX5DV330 is a quad 1-of-2 high-speed TTL-compatible video multiplexer/demultiplexer. The low ON resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise It has a digital select input (S), four independent inputs/outputs (nY0, nY1), a common input/output (nZ) and an active LOW enable input (E). When pin E is HIGH, the switch is turned off. Schmitt-trigger action at the enable input (E) and select input (S) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 4.0 V to 5.5 V. The NX5DV330 is characterized for operation from -40 °C to +85 °C. more
    Parts: NX5DV330D,112, NX5DV330PW,118, NX5DV330DS,112, NX5DV330D, NX5DV330DS, NX5DV330DS,118, NX5DV330PW, NX5DV330D,118, NX5DV330PW,112, NX5DV330BQ,115more

    FST3253 - Dual 4:1 Multiplexer/Demultiplexer Bus Switch

    Fairchild Semiconductor Corporation
    The Fairchild Switch FST3253 is a dual 4:1 high-speed CMOS TTL-compatible multiplexer/demultiplexer bus switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. more
    Parts: FST3253MTC, FST3253MTCX_NL, FST3253QSCX_NL, FST3253MX, FST3253QSC, FST3253MTCX, FST3253QSCX, FST3253Mmore

    74AHC_AHCT257 - Quad 2-input multiplexer; 3-state

    NXP Semiconductors
    IC AHCT/VHCT/VT SERIES, QUAD 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16, 4.40 MM, PLASTIC, MO-153, SOT-403-1, TSSOP-16, Multiplexer/Demultiplexer more
    Parts: 74AHCT257PW,118, 74AHC257D-T, 74AHCT257D,112, 74AHCT257PW,112, 74AHC257PW,118, 74AHC257PWDH-T, 74AHC257D,118, 74AHCT257D-T, 74AHC257PW,112, 74AHC257D,112, 74AHCT257PW-T, 74AHCT257D,118more

    74AHC_AHCT157 - Quad 2-input multiplexer

    NXP Semiconductors
    IC AHC/VHC/H/U/V SERIES, QUAD 2 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16, 4.40 MM, PLASTIC, MO-153, SOT403-1, TSSOP-16, Multiplexer/Demultiplexer more
    Parts: 74AHC157PW,112, 74AHCT157D,112, 74AHC157D,112, 74AHCT157PW,112, 74AHC157D,118, 74AHCT157PW-T, 74AHC157PW-T, 74AHCT157PW,118, 74AHCT157D-T, 74AHCT157D,118, 74AHC157D-T, 74AHC157PW,118more

    MC74VHC157-D: Quad 2-Channel Multiplexer

    ON Semiconductor
    The MC74VHC157 is an advanced high--speed CMOS quad 2--channel multiplexer, fabricated with silicon gate CMOS technology. It achieves high--speed operation similar to equivalent Bipolar--Schottky TTL, while maintaining CMOS low--power dissipation. more
    Parts: MC74VHC157DR2, MC74VHC157DTR2, MC74VHC157DTEL, MC74VHC157DT, MC74VHC157MEL, MC74VHC157D, MC74VHC157DTR2G, MC74VHC157DR2G, MC74VHC157Mmore

    3-Digit BCD Counter

    ON Semiconductor
    The MC14553B 3-digit BCD counter consists of 3 negative edge triggered BCD counters that are cascaded synchronously. A quad latch at the output of each counter permits storage of any given count. The information is then time division multiplexed, providing one BCD number or digit at a time. Digit select outputs provide display control. All outputs are TTL compatible. more
    Parts: MC14553BCP, MC14553BCPGmore

    MM74HC157 - Quad 2-Input Multiplexer

    Fairchild Semiconductor Corporation
    The MM74HC157 high speed Quad 2-to-1 Line data selector/ Multiplexers utilizes advanced silicon-gate CMOS technology. It possesses the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 10 LS-TTL loads. more
    Parts: MM74HC157M, MM74HC157N_NL, MM74HC157M_NL, MM74HC157MTC, MM74HC157SJ, MM74HC157SJX, MM74HC157MTCX, MM74HC157N, MM74HC157MX_NL, MM74HC157MXmore

    FSA2257 - Low RON Low Voltage Dual SPDT Bi-directional Analog Switch

    Fairchild Semiconductor Corporation
    The FSA2257 is a high-performance bi-directional dual Single-Pole/Double-Throw (SPDT) analog switch. This switch can be configured as either a multiplexer or a demultiplexer by select pins. The device features ultra-low RON of 1.3O maximum at 4.5V VCC and operates over the wide VCC range of 1.65V to 5.5V. The device is fabricated with submicron CMOS technology to achieve fast switching speeds and is designed for break-before-make operation. The select input is TTL-level compatible. more
    Parts: FSA2257L10X, FSA2257MTCX, FSA2257MUX, FSA2257L10X_NL, FSA2257MTCX_NLmore

    MM74HC151 - 8-Channel Digital Multiplexer

    Fairchild Semiconductor Corporation
    The MM74HC151 high speed Digital multiplexer utilizes advanced silicon-gate CMOS technology. Along with the high noise immunity and low power dissipation of standard CMOS integrated circuits, it possesses the ability to drive 10 LS-TTL loads. The MM74HC151 selects one of the 8 data sources, depending on the address presented on the A, B, and C inputs. It features both true (Y) and complement (W) outputs. The STROBE input must be at a low logic level to enable this multiplexer. A high logic level at the STROBE forces the W output HIGH and the Y output LOW. more
    Parts: MM74HC151SJX, MM74HC151SJ, MM74HC151N_NL, MM74HC151MTCX_NL, MM74HC151MTCX, MM74HC151MTC, MM74HC151MX_NL, MM74HC151SJX_NL, MM74HC151M, MM74HC151M_NL, MM74HC151MX, MM74HC151Nmore

    MC74LCX257-D: Low-Voltage CMOS Quad 2-Input Multiplexer

    ON Semiconductor
    The MC74LCX257 is a high performance, quad 2-input multiplexer with 3-state outputs operating from a 2.3 to 3.6 V supply. High impedance TTL compatible inputs significantly reduce current loading to input drivers while TTL compatible outputs offer improved switching noise performance. A VI specification of 5.5 V allows MC74LCX257 inputs to be safely driven from 5.0 V devices. more
    Parts: MC74LCX257MEL, MC74LCX257M, MC74LCX257MELG, MC74LCX257DR2, MC74LCX257DT, MC74LCX257DTR2, MC74LCX257SD, MC74LCX257DTR, MC74LCX257MR2, MC74LCX257SDR2, MC74LCX257DTR2G, MC74LCX257D, MC74LCX257DR2G, MC74LCX257DTG, MC74LCX257MGmore

External Links

    5962-8777801XA

    Texas Instruments
    TRANSISTOR 42 V, 3 CHANNEL, NPN AND PNP, Si, POWER TRANSISTOR, HERMETIC SEALED, SIMILAR TO TO-5, 3 PIN, BIP General Purpose Power more

    LM395T/NOPB

    Texas Instruments
    TRANSISTOR 36 V, 3 CHANNEL, NPN AND PNP, Si, POWER TRANSISTOR, TO-220AB, PLASTIC, T03B, 3 PIN, BIP General Purpose Power more

    LP395Z/LFT4

    Texas Instruments
    Ultra Reliable Power Transistor 3-TO-92 more

    LP395Z/LFT1

    Texas Instruments
    Ultra Reliable Power Transistor 3-TO-92 more
Need more help? Try the help page