Renesas Electronics Corporation - PS7141, Solid State Relay Datasheet

    Renesas Electronics Corporation
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, DIP-6 more
    Parts: PS7141-1A-A, PS7141L-1A-E4-A, PS7141L-1A-E3-A, PS7141L-1A-Amore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1500 V ISOLATION-MAX, SOP-8 more
    Parts: LH1540ACD, LH1540ACDTRmore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, DIP-8 more
    Parts: LH1521BB, LH1521BAC, LH1521BACTRmore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 5300 V ISOLATION-MAX, SMD-8 more
    Parts: LH1526AACTRmore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, GULLWING, SMD, 8 PIN more
    Parts: LH1514AACTRmore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, SMD-8 more
    Parts: LH1523BAC, LH1523BB, LH1523BACTRmore

    Infineon Technologies AG - , Solid State Relay Datasheet

    Infineon Technologies AG
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 3000 V ISOLATION-MAX, PLASTIC, FLAT PAK, 8 PIN more
    Parts: LH1532FPTRmore

    VN31SP: ISO HIGH SIDE SMART POWER SOLID STATE RELAY

    STMicroelectronics
    The VN31SP is a monolithic device made using STMicroelectronics VIPower Technology,intended for driving resistive or inductive loadswith one side grounded. Built-in thermal shut-down protects the chip fromover temperature and short circuit. The open drain diagnostic output indicates: openload in off state, and in on state, output shorted toVCC and overtemperature. Fast demagnetizationof inductive loads is archivied by negative (-18V) load voltage at turn-off. more
    Parts: VN31SP13TR, VN31, VN31SPmore

    VNQ690SP-E: QUAD CHANNEL HIGH SIDE SOLID STATE RELAY

    STMicroelectronics
    The VNQ690SP-E is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving resistive or inductive loads with one side connected to ground. This device has four independent channels. Built-in thermal shut down and output current limitation protect the chip from over temperature and short circuit. more
    Parts: VNQ690, VNQ690SP-Emore

    VNI2140J: Dual high side smart power solid state relay

    STMicroelectronics
    The VNI2140J is a monolithic device designed using STMicroelectronics' VIPower technology. The device drives two independent resistive or inductive loads with one side connected to ground. Active current limitation prevents a drop in system power supply in cases of shorted-load, and built-in thermal shutdown protects the chip from damage due to over-temperature and short-circuit. In overload conditions, channel turns OFF and ON automatically to maintain the junction temperature between TTSD and TR. If the case temperature reaches TCSD, the overloaded channel is turned OFF and restarts only when case temperature decreases down to TCR. In order to avoid high-peak current from the supply, when more than one channel is overloaded the TCSD restart is not simultaneous. Non overloaded channels continue to operate normally. The open-drain diagnostics output indicates over-temperature conditions and open-load in off state. more
    Parts: VNI2140J, VNI2140more

    VN920B5-E: SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY

    STMicroelectronics
    The VN920B5-E is a monolithic device designed in STMicroelectronicsT VIPowerT M0-3 technology. The VN920B5-E is intended for driving any type of load with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns off in the case where the ground pin becomes disconnected. more
    Parts: VN920, VN920B5-Emore

    VO14642AT, VO14642AABTR 1 Form A Solid State Relay Datasheet

    Vishay Semiconductors
    Relay SSR 50mA 1.5V DC-IN 2A 60V AC/DC-OUT 6-Pin PDIP SMD T/R more
    Parts: VO14642AT, VO14642AABTRmore

    High Current, Solid State Relay (Photo MOSFET) (60V/1.0A/0.5?)

    Avago Technologies
    The ASSR-15XX Series is specifically designed for high current applications, commonly found in the industrial applications.<p><p>The ASSR-15XX Series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. <p><p>The single channel configurations, ASSR-1510 and ASSR-1511, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1520, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to +85°C. <p><p>ASSR-1511 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 2A and the on-resistance, R(ON) reduces to 0.25O. more
    Parts: ASSR-1511-001E, ASSR-1520-002E, ASSR-1510, ASSR-1511, ASSR-1520, ASSR-1530, ASSR-1530-005E, ASSR-1510-003Emore

    VN330SP-E: Quad high side smart power solid state relay

    STMicroelectronics
    The VN330SP-E is a monolithic device made using STMicroelectronics VIPower technology, intended for driving four indipendent resistive or inductive loads, with one side connected to ground. Active current limitation avoids dropping the system power supply in case of shorted load. Built-in thermal shut-down protects the chip from overtemperature and short circuit. The open drain diagnostic output indicates overtemperature conditions. more
    Parts: VN330SP-E, VN330SPTR-E, VN330more

    Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10?)

    Avago Technologies
    The ASSR-12XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. <p><p>The single channel configurations, ASSR-1218 and ASSR-1219, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1228, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. ASSR-1219 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 0.4A and the on-resistance, R(ON) reduces to 2.5O. more
    Parts: ASSR-1219-001E, ASSR-1228-002E, ASSR-1228, ASSR-1218-003E, ASSR-1219, ASSR-1218more

    VND600SP-E: DOUBLE CHANNEL HIGH SIDE SOLID STATE RELAY

    STMicroelectronics
    The VND600SP-E is a monolithic device made using STMicroelectronicsT VIPowerT M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). This device has two channels in high-side configuration; each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current. Built-in thermal shutdown and outputs current limitation protect the chip from overtemperature and short circuit. Device turns-off in case of ground pin disconnections. more
    Parts: VND600, VND600SP-E, VND600SPTR-Emore

    VNI4140K: Quad high-side smart power solid-state relay

    STMicroelectronics
    The VNI4140K is a monolithic device made using STMicroelectronics VIPower technology, intended for driving four independent resistive or inductive loads with one side connected to ground. Active current limitation avoids dropping the system power supply in case of shorted load. Built-in thermal shutdown protects the chip from overtemperature and short circuit. In overload condition, channel turns OFF and back ON automatically so as to maintain junction temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned OFF and will restart only when case temperature has decreased down to TCR. In case of more than one channel in overload, re-start of the overloaded channels will not be simultaneous, in order to avoid high peak current from the supply. Non overloaded channels continue to operate normally. The open drain diagnostics outputs indicates over-temperature conditions. more
    Parts: VNI4140KTR, VNI4140, VNI4140Kmore

    VND920P-E: DOUBLE CHANNEL HIGH SIDE SOLID STATE RELAY

    STMicroelectronics
    The VND920P-E is a double chip device designed in STMicroelectronicsT VIPower T M0-3 technology. The VND920P-E is intended for driving any type of load with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns off in the case where the ground pin becomes disconnected. more
    Parts: VND920, VND920PTR-E, VND920P-Emore

    LH1513AAC, LH1513AACTR, LH1513AB 2 Form A Solid-State Relay Datasheet

    Vishay Semiconductors
    IC,NORMALLY-OPEN PC-MOUNT SOLID-STATE RELAY,1-CHANNEL,DIP more
    Parts: LH1513AACTR, LH1513AAC, LH1513ABmore

    LH1521BACTR Dual 1 Form B Solid-State Relay Datasheet

    Vishay Semiconductors
    TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, ROHS COMPLIANT, SMD, 8 PIN more
    Parts: LH1521BACTRmore

    VN340SP-E: Quad high side smart power solid state relay

    STMicroelectronics
    The VN340SP-E is a monolithic device made using STMicroelectronics VIPower technology, intended for driving four indipendent resistive or inductive loads with one side connected to ground. Active current limitation avoids dropping the system power supply in case of shorted load. Built-in thermal shut-down protects the chip from overtemperature and short circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when overtemperature condition of the relative channel is verified. more
    Parts: VN340, VN340SP-E, VN340SPTR-Emore

    VN920SP-E: SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY

    STMicroelectronics
    The VN920SP-E is a monolithic device designed in STMicroelectronicsT VIPowerT M0-3 technology. The VN920SP-E is intended for driving any type of load with one side connected to ground. The active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).Active current limitation combined with thermal shutdown and automatic restart protects the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns-off in the case where the ground pin becomes disconnected. more
    Parts: VN920, VN920SPTR-E, VN920SP-Emore

    VO1400AEFTR 1 Form A Solid State Relay Datasheet

    Vishay Semiconductors
    Relay SSR 50mA 1.4V DC-IN 0.1A 60V AC/DC-OUT 4-Pin SOP T/R more
    Parts: VO1400AEFTRmore

    VND600P-E: Double channel high-side solid state relay

    STMicroelectronics
    The VND600P-E is a double chip device designed in STMicroelectronicsT VIPowerT M0-3 technology. The device is intended for driving any type of load with one side connected to ground. The active VCCpin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation combined with thermal shutdown and automatic restart protect the device against overload. The device integrates an analog current sense output which delivers a current proportional to the load current. The device automatically turns off in the case where the ground pin becomes disconnected. more
    Parts: VND600, VND600P-Emore

    Infineon Technologies AG - LH1539AB, Solid State Relay Datasheet

    Infineon Technologies AG
    TRANSISTOR OUTPUT SOLID STATE RELAY, 5300 V ISOLATION-MAX, DIP-8 more
    Parts: LH1539AB, LH1539AACTR, LH1539AACmore

    General Purpose, Form A, Solid State Relay (Photo MOSFET) (250V/0.2A/10?)

    Avago Technologies
    The ASSR-32XX Series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. <p>The single channel configurations, ASSR-3210 and ASSR-3211, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-3220, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to +85°C. They are used for general purpose switching of signals and low power AC/DC loads.<p>ASSR-3211 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 0.4A and the on-resistance, R(ON) reduces 2.5O. more
    Parts: ASSR-3210-003E, ASSR-3211-001E, ASSR-3220, ASSR-3211, ASSR-3210, ASSR-3220-002Emore

    General Purpose, Form A, Solid State Relay (Photo MOSFET) (60V/0.6A/1?)

    Avago Technologies
    The ASSR-14XX Series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.<p><p>The single channel configurations, ASSR-1410 and ASSR-1411, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-1420, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to +85°C. They are used for general purpose switching of signals and low power AC/DC loads.<p><p>ASSR-1411 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 1.2A and the on-resistance, R(ON) reduces 0.5O. more
    Parts: ASSR-1420-002, ASSR-1410-003, ASSR-1420-002E, ASSR-1410-003E, ASSR-1411-001, ASSR-1411-001Emore

    VOM1271 Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay Datasheet

    Vishay Semiconductors
    SOP-4 SSR MOSFET DRIVER -E3 - Tape and Reel more
    Parts: VOM1271Tmore

    VN5772AK-E: Quad smart power solid state relay for complete H bridge configurations

    STMicroelectronics
    The VN5772AK-E is a device formed by three monolithic chips housed in a standard SO-28 package: a double high-side and two low-side switches. The double high-side is made using STMicroelectronics VIPower M0-5 technology, while the low-side switches are fully protected VIPower M0-5 OMNIFET III. This device is suitable to drive a DC motor in a bridge configuration as well as to be used as a quad switch for any low-voltage application.The dual high-side switches integrate built-in non latching thermal shutdown with thermal hysteresis. An output current limiter protects the device in overload condition. In the case of long overload duration, the device limits the dissipated power to a safe level-up to thermal shutdown intervention. An analog current sense pin delivers a current proportional to the load current (according to a known ratio) and indicates over temperature shutdown of the relevant high-side switch through a voltage flag.The low side switches have built-in non latching thermal shutdown with thermal hysteresis, linear current limitation and overvoltage clamping. In case of long overload duration, the low side switches limit the dissipated power to a safe level up to the thermal shutdown intervention. Fault feedback for over temperature shutdown of the low side switch is indicated by the relevant status pin.. more
    Parts: VN5772, VN5772AK-Emore

    STEVAL-IFP006V1: Quad high side smart power solid state relay evaluation board using the VNI4140K

    STMicroelectronics
    The purpose of this design is to demonstrate the features of the VNI4140K quad high side smart power solid state relay. The application offers robustness and complies with EMC industrial standards. It implements short-circuit/overload protection and thermal management as well, achieving best-in-class MTBF values. The reference design is suitable for use in programmable logic controllers (PLCs) as well as to drive generic loads which require up to 0.7 A of nominal current (the typical current limitation is 0.7 - 1.7 A). Thanks to the very low RDS(on) (only 80 m ? typ. @ 25 °C per channel) the device allows very low power consumption during operation and for this reason making it an ideal solution for IP65 / IP67 requirements. The device is compliant with IEC 61131-2 (Programmable Controllers International Standard). more
    Parts: STEVAL-IFP006V1more

    Low C x R, Form A, Solid State Relay (Photo MOSFET) (400V/100?/15pF)

    Avago Technologies
    The ASSR-40xC Series is specifically designed for fast switching applications, commonly found in the test and measurement systems. The low C x R and low output off-state leakage current provide higher system throughput and reduce system errors. <p><p>The dual channel configuration of ASSR-402C is equivalent to 2 Form A Electromechanical Relays (EMR). One channel of the relay consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 1mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.<p><p>ASSR-401C is available in 4-pin SO package and ASSR-402C is available in 8-pin DIP and Gull Wing Surface Mount packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to +85°C. more
    Parts: ASSR-402, ASSR-401, ASSR-402C-002E, ASSR-401C-003Emore

    LH1523BB, LH1523BAC, LH1523BACTR Dual 1 Form B Solid State Relay Datasheet

    Vishay Semiconductors
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, ROHS COMPLIANT, DIP-8 more
    Parts: LH1523BAC, LH1523BB, LH1523BACTRmore

    Low C x R, Form A, Solid State Relay (250V/8.5?/60pF)

    Avago Technologies
    ASSR-322R is specifically designed for fast switching applications, commonly found in the test and measurement systems. The low C x R and low output off-state leakage current provide higher system throughput and reduce system errors.<p>The dual channel configuration of the relay is equivalent to 2 Form A Electromechanical Relays (EMR). One channel of the relay consists of an AlGaAs infrared lightemitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. more
    Parts: ASSR-322R-002E, 322more

    VN340SP-33-E: Quad high side smart power solid state relay

    STMicroelectronics
    The VN340SP-33-E is a monolithic device made using STMicroelectronics VIPower technology, intended for driving four indipendent resistive or inductive loads with one side connected to ground. Active current limitation avoids dropping the system power supply in case of shorted load. Built-in thermal shut-down protects the chip from overtemperature and short circuit. The open drain diagnostic output indicates overtemperature conditions. Each I/O is pulled down when overtemperature condition of the relative channel is verified. more
    Parts: VN340, VN340SP-33-E, VN340SPTR-33-Emore

    RDHA710SE10A2FK: Radiation Hardened Dual 100V 10A Solid-State Relay with Buffered Inputs and Fast Response

    International Rectifier
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1000 V ISOLATION-MAX, HERMETIC SEALED, SURFACE MOUNT PACKAGE-8 more
    Parts: RDHA710SE10, RDHA710SE10A2FKmore

    VO1263AAC, VO1263AACTR, VO1263AB Dual Photovoltaic MOSFET Driver Solid-State Relay Datasheet

    Vishay Semiconductors
    VO1263AAC, VO1263AACTR, VO1263AB Dual Photovoltaic MOSFET Driver Solid-State Relay more
    Parts: VO1263AACTR, VO1263AB, VO1263AACmore

    General Purpose, Form A, Solid State Relay (Photo MOSFET) (400V/0.12A/25?)

    Avago Technologies
    The ASSR-41XX Series consist of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less.<p><p>The single channel configurations, ASSR-4110 and ASSR-4111, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-4120, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. Their electrical and switching characteristics are specified over the temperature range of -40°C to +85°C. They are used for general purpose switching of signals and low power AC/DC loads.<p><p>ASSR-4111 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 0.24A and the on-resistance, R(ON) reduces 8.5O. more
    Parts: ASSR-4111-001E, ASSR-4110, ASSR-4120-002E, ASSR-4111, ASSR-4110-003E, ASSR-4120more

    RDHA710SE10A2QK: Radiation Hardened Dual 100V 10A Solid-State Relay with Buffered Inputs Controlled Response and 5.0V Logic Drive Voltage

    International Rectifier
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1000 V ISOLATION-MAX, HERMETICALLY SEALED, SURFACE MOUNT PACKAGE-8 more
    Parts: RDHA710SE10A2QK, RDHA710SE10more

    RDHA710SE10A2SK: Radiation Hardened Dual 100V 10A Solid-State Relay with Buffered Inputs Controlled Response and 3.3V Logic Drive Voltage

    International Rectifier
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1000 V ISOLATION-MAX, HERMETICALLY SEALED, SURFACE MOUNT PACKAGE-8 more
    Parts: RDHA710SE10, RDHA710SE10A2SKmore

    RDHA701CD10A2NX: Radiation Hardened 100V 1.0A Dual Single Pole Single Throw normally open Solid-State Relay 8-Pin Ceramic

    International Rectifier
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, HERMETIC SEALED, CERAMIC PACKAGE-8 more
    Parts: RDHA701CD10A2NX, RDHA701CD10more

    RDHA720SF06A1NK: Radiation Hardened 60V 20A Solid-State Relay in a hermetic package. Configured as a single-pole-single-throw (SPST) normally open relay.

    International Rectifier
    TRANSISTOR OUTPUT SOLID STATE RELAY, 1000 V ISOLATION-MAX, HERMETICALLY SEALED, SURFACE MOUNT PACKAGE-5 more
    Parts: RDHA720SF06, RDHA720SF06A1NKmore

    Isocom Components - ISPB20, Solid State Relay Datasheet

    Isocom Components
    TRANSISTOR OUTPUT SOLID STATE RELAY, 3750 V ISOLATION-MAX, DIP-4 more
    Parts: ISPB20, ISPB20-SMT&R, ISPB20-G, ISPB20-SMmore

    Crydom - D21110,D2490 Solid State Relay Datasheet

    Crydom
    TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX, PLASTIC PACKAGE-4 more
    Parts: D24125GP-10, A2475EFGPH-B, A2475GP-B, D2475GPH-10, A24125FGH-10, A24125GP-10, A2490EFGPH, A2425EGP, A24110FGP-B, A2475EFGPH-10, A24125EGP-10, D2490GP-B, A2425FGP, A2490FG, A24110EFG-10, D2490FGPH-10, A2425GPH, A24110FG, A2490EFG-B, A2475, D2450GPH-10, D24125FGPH-10, D2410GP-B, A2410EFGP-10, D21110FGH, A2490GPH-10, A24125FGP-10, D2410GP, D2450FGPH, D2490FGH-B, A2475FGPH, D2425FGP-B, A2450GP, A2425EFGPH-10, A2490FGP, D2490GPH-B, D21110FGP, A2490FGH, D21110FGP-B, A2490GPH-B, A24110, A24110EFGP-B, D2450GP-10, A2450FGPH, D2410GP-10, D24125GPH, A24110GPH, D2475GPH, A24125EGPH-10, A2490EGPH-B, A24125GPH-B, A2450EFGP, A2410FGPH-10, D2490FGPH-B, D2425FGPH, A2490EFG, A2410EGPH-B, A2410FGPH-B, D2490, D2410FGP, D2475GP-B, A24110FGH-B, A2450, A2410EFGP-B, D2425GP-B, D2410FGPH-B, A24110EGP, D21110, A2450EFGPH, A24125FG-10, A24125FG, D21110GPH, A2490GP-10, A2450EGPH-10, D2410FGP-B, A24125EGPH, A2450GPH, D21110FGPH-B, A2450EGP-10, A24125EGP-B, A2450GP-B, D24125GP, D2425GP, A2425FGP-10, A24125EGP, A24110FGPH-B, A24125GP, A2410EGPH, A24125EFG-10, A2490FGPH, D2425GPH-10, D24125FGP, A2475EFGH-10, A2425EFGPH-B, D2490FGH-10, D24125FGH-B, A2475EFGPH, A24125FGH, A2475FG-B, A24125EFGmore

    Crydom - B53TP25,D53TP25 Solid State Relay Datasheet

    Crydom
    TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX, ROHS COMPLIANT PACKAGE-6 more
    Parts: D53TP50, B53TP50, D53TP25C, C53TP50, D53TP50C-10, E53TP25C-10, C53TP50C-10, B53TP25, B53TP25C, E53TP25, C53TP25, E53TP50, C53TP25C, E53TP50C-10, C53TP25C-10, E53TP50C, B53TP50C, D53TP25C-10, C53TP50C, E53TP25C, D53TP25, D53TP50C, B53TP25C-10, B53TP50C-10more

    Micropac Industries Inc - , Solid State Relay Datasheet

    Micropac Industries Inc
    IC,NORMALLY-OPEN PC-MOUNT SOLID-STATE RELAY,1-CHANNEL,M:ML9.4MW9.4 more
    Parts: 53017, 53016, 53015, 53014, 53013more

    Micropac Industries Inc - , Solid State Relay Datasheet

    Micropac Industries Inc
    IC,NORMALLY-OPEN PC-MOUNT SOLID-STATE RELAY,1-CHANNEL,DIP more
    Parts: 53007, 53006, 53009, 53008, 53005, 53004, 53010, 53000more

    Micropac Industries Inc - , Solid State Relay Datasheet

    Micropac Industries Inc
    DUAL TRANSISTOR OUTPUT SOLID STATE RELAY, 1000 V ISOLATION-MAX, HERMETIC SEALED, CERAMIC, DIP-8 more
    Parts: 53252more

    Micropac Industries Inc - , Solid State Relay Datasheet

    Micropac Industries Inc
    IC,NORMALLY-OPEN PC-MOUNT SOLID-STATE RELAY,1-CHANNEL,M:ML9.4MW9.4 more
    Parts: 53022, 53020, 53021, 53019, 53018more

    Crydom - EZE480A12, Solid State Relay Datasheet

    Crydom
    TRIGGER OUTPUT SOLID STATE RELAY, COMPACT, PLASTIC PACKAGE-4 more
    Parts: EZE480A12, EZE480A12SSmore

    Crydom - HS053, Solid State Relay Datasheet

    Crydom
    TRIGGER OUTPUT SOLID STATE RELAY, 4000 V ISOLATION-MAX, ROHS COMPLIANT, PLASTIC PACKAGE-8 more
    Parts: HS053-D53TP50D, HS053, HS053-D24125, HS053-HD60125more

External Links

Need more help? Try the help page